Medical Archive Solutions User Guide

167
HP Medical Archive
Configuration
HTTP
The configuration settings for the LDR X HTTP component allow you
to set the basic state of the protocol component, select whether or not
to enable the protocol on service restarts, and reset transaction
counters to clear alarms.
Connectivity
There are no configurable settings offered for the Connectivity
component.
Table 67: LDR
X HTTP Component Configuration Settings
Prompt Type Description
HTTP State Pull-down
menu
Sets the component to be either:
• Offline—No HTTP transactions are allowed, and
any user who tries to open an HTTP session to
the LDR receives an error message. Active
sessions are gracefully closed. HTTP component
counter attributes are reset to zero.
• Redirect—Transparently redirects sessions to
other LDR services. No HTTP processing is per-
formed locally.
• Online (Read-Only)—Only query and retrieve
operations are permitted.
• Online—Normal operation.
Auto-Start HTTP Check box Enables the HTTP component when the service is
restarted. If not selected, the HTTP interface remains
Offline until explicitly enabled.
If the check box is selected, the state on restart
depends on the state of the Storage component. If the
storage component is read-only on startup, the HTTP
interface is also read-only. If the storage component
is online, then HTTP is also online. Otherwise the
HTTP interface remains in the Offline state.
Reset HTTP
Counts
Check box When selected and applied, the counter attributes for
HTTP transactions are reset to zero. This can be used
to clear alarms.