Medical Archive Solutions User Guide

183
HP Medical Archive
Troubleshooting Alarms
MSTU Status of the DICOM protocol
component:
• 0 = No Errors
• 1=Not Started
• 2 = Invalid/Missing DICOM
Dictionary
• 3 = Starting...
• 4 = Stopping...
• 5 = Invalid/Missing Index Tag List
Restart the service.
If the error persists, it may
indicate an installation problem.
Contact HP technical support.
NADC Number of ADCs the device is connected
to.
There should always be at least one ADC.
If there are no connected ADCs, the server
starts drifting in relative time, which may
affect system operations and synchroniza-
tion over longer periods.
Restore connectivity to an ADC as
soon as possible. This may require
updating authentication
certificates.
If this condition persists, contact
HP technical support.
NAMS Number of AMSs the device is connected
to.
If there are no connected AMSs, the
device cannot report audit events and
they are queued and unavailable to users
until the AMS connection is restored.
Restore connectivity to an AMS as
soon as possible. This may require
updating authentication
certificates.
If this condition persists, contact
HP technical support.
NANG Network Auto Negotiate setting:
• 0=Off
• 1=On
• 2 = Unavailable
• 3=Unknown
• 4 = Unsupported
Check the network adapter config-
uration. The setting must match
preferences of your network
routers and switches.
An incorrect setting can have a
severe impact on grid
performance.
Attr.
Code
Description Recommended Action