Medical Archive Solutions User Guide

HPMA User Guide
190
HP Medical Archive
SPOP FSG Pending Operations; indicates the
number of replication messages to be pro-
cessed by a Secondary FSG. If this rises, it
indicates that you are storing data faster
than the Secondary FSG can process
transactions. This normally declines
during periods of reduced grid activity.
There is a warning at 500, and a minor
alarm if more than 1000.
Note: this alarm may trigger during normal
file system backup. Allow any active backup to
complete, then monitor for a declining value.
Stop storing files into the Primary
FSG of the group. Wait a few
minutes to determine if the value
of this attribute declines. When
the alarm clears, resume normal
activity on the Primary FSG.
If the value does not decline,
contact HP technical support.
SSMA SSM Device Status; indicates the general
status of the SSM service:
• 0=No errors
• 10 = Errors
If there is an Error, check the
Overview and Alarm tabs for the
device to find the cause of the
error and to troubleshoot the
problem.
If the problem persists, contact HP
technical support.
SSME SSM Device State; whether the device is:
• 0 = Offline
• 1=Standby
• 2=Online
If the device goes into “Standby”,
continue monitoring and if the
problem persists, contact HP tech-
nical support.
If the device goes into “Offline”
and there are no known server
hardware issues (server
unplugged) or a scheduled
downtime for the device, contact
HP technical support.
Attr.
Code
Description Recommended Action