HP B-series Fabric OS 7.0.2d Release Notes (5697-2822, August 2013--includes all 7.0.x versions)

• HP StorageWorks SAN Director 32 Port 8 Gbps FC Blade (Brocade FC8-32)

• HP StorageWorks SAN Director 48 Port 8 Gbps FC Blade (Brocade FC8-48)

• HP StorageWorks SAN Director 64 Port 8 Gbps FC Blade (Brocade FC8-64)

• HP StorageWorks SAN Director 6 Port 10 Gbps FC ISL Blade (Brocade FC10-6)

• HP StorageWorks DC Switch Encryption FC Blade (Brocade FS8-18)

• HP StorageWorks EVA4400 Embedded Switch Module (Brocade 5410)

• Brocade 8 Gbps SAN Switch for HP BladeSystem c-Class (Brocade 5480)

• HP StorageWorks 1606 Extension SAN Switch (Brocade 7800)

• HP StorageWorks 2408 FCoE Converged Network Switch (Brocade 8000)

• HP StorageWorks DC SAN Director Switch 10/24 FCoE Blade (Brocade FCOE10-24)

• HP StorageWorks DC SAN Director Multiprotocol Extension Blade (Brocade FX8-24)

Unsupported product models

Any product models not listed in “Supported product models” (page 9) do not support Fabric OS

7.0.0a or later.

Devices supported

For a list of supported devices, see the HP website:

http://www.hp.com/go/san

Operating systems

For a list of operating systems, see the HP website:

http://www.hp.com/go/san

Access Gateway support

Access Gateway is supported with Fabric OS 7.0.2d for the following HP products only:

• Brocade 8 Gbps SAN Switch for HP BladeSystem c-Class (Brocade 5480)

• HP StorageWorks 8/24 SAN Switch (Brocade 300)

• HP StorageWorks 8/40 SAN Switch (Brocade 5100)

• HP StorageWorks 2408 FCoE Converged Network Switch (Brocade 8000)

• HP SN6000B 16 Gbps FC Switch (Brocade 6510)

• HP SN3000B 16 Gbps FC Switch (Brocade 6505)

IMPORTANT: Although the 8/8 SAN Switch uses the same hardware as the 8/24 SAN Switch,

it does not support Access Gateway because only the 8/24 switch has all ports licensed as required

for Access Gateway support. Similarly, for the 8/40 switch to support Access Gateway mode, all

ports must be licensed. If you are using DCFM to manage a fabric with a 2408 FCoE switch in

Access Gateway mode, version 10.4.0 or later is required.

NOTE: EVA storage arrays are not supported directly connected to any switch configured for

Access Gateway mode.