HP B-series Fabric OS 7.0.2d Release Notes (5697-2822, August 2013--includes all 7.0.x versions)

Table 4 Power supplies required for blades in DC SAN Backbone and DC04 SAN Director chassis
(continued)
DC SAN Backbone Director and DC04 SAN DirectorDirector blade
For the DC SAN Backbone Director or DC04 SAN Director,
only two 220 VAC power supplies are required for
redundancy with FX8-24 blades.
2
1
The FC blades in this row are the only ones supported in the DC SAN Backbone Director or DC04 SAN Director with
110 VAC power supplies.
2
110 VAC is not supported in either the DC SAN Backbone Director or DC04 SAN Director with these blades.
Table 5 Power Supply Requirements for HP SN8000B 8-Slot SAN Backbone Director Switch
HP SN8000B 8-Slot SAN Backbone
Director Switch
Director bladeNumber of Ports
Two power suppliesFC8-64Any combination of 8 Gbps or 16
Gbps ports
FC16-32
FC8-32E
Two power suppliesFC8-32E, FC8-48E (Maximum of fully
populated FC8-32E blades)
256 8 Gbps ports
Two power suppliesFC16-32256 16 Gbps ports
FC16-48
(Maximum of fully populated FC16-32
blades)
Two power suppliesFC16-32192 16 Gbps Ports & max 2
intelligent blades (FX8-24
/FS8-18/combination)
FC16-48
FX8-24
FS8-18(Two intelligent blades and
maximum of four slots populated with
FC16-xx/FC8-xxE blades)
Two power suppliesFC8-32E192 8 Gbps Ports & max 2 intelligent
blades
(FX8-24/FS8-18/combination)
FC8-48E
FX8-24
FS8-18 (Two intelligent blades and
maximum of four slots populated with
FC16-xx/FC8-xxE blades)
Two power suppliesFC16-48 (Maximum of seven FC16-48
blades, with one empty port blade slot)
336 16 Gbps ports
Two power suppliesFC8-48E (Maximum of seven FC8-48E
blades, with one empty port blade slot)
336 8 Gbps ports
Four power suppliesFC16-32384 16 Gbps ports
FC16-48
Four power suppliesFC8-32E384 8 Gbps ports
FC8-48E
Four power suppliesFC16-32Any combination of 8 Gbps or 16
Gbps ports and intelligent blades
FC16-48
FC8-64
FC8-32E
FC8-48E
DC SAN Backbone and DC04 SAN Director blade support 17