Data Center Fabric Manager Enterprise User Manual - Supporting DCFM 10.3.x (53-1001357-01, October 2009)
118 DCFM Enterprise User Manual
53-1001357-01
Software Configuration
3
Software Configuration
The Management application allows you to configure the following software settings:
• Client export port—A port for communication between the client and server.
• Discovery—HTTP or HTTP over SSL when connecting to the switch.
• FTP/SCP overview—Internal or external FTP server settings.
• IP Configuration—Configure the Ethernet ports with the IP address.
• Memory allocation—Memory allocation for the client and server.
• Server port—Server port settings.
• Support mode—Support settings to allow enhanced diagnostics.
Client export port
You can configure a port for communication between the client and server.
Configuring the client export port
To configure client export port settings, complete the following steps.
1. Select SAN > Options.
The Options dialog box displays (Figure 44).
FIGURE 44 Options Dialog Box (Client Export Port option)
2. Select Client Export Port to assign a communications port between the client and server in the
Category list.