Data Center Fabric Manager Enterprise User Manual - Supporting DCFM 10.3.x (53-1001357-01, October 2009)

164 DCFM Enterprise User Manual
53-1001357-01
Configuring a Radius server
4
1. Select the Authentication tab (Figure 62).
FIGURE 62 Authentication tab
2. For Primary Authentication, select Radius Server.
3. Click Add.
The Add or Edit Radius Server dialog box is displayed (Figure 63).
FIGURE 63 Add or Edit Radius Server
4. Enter the radius server’s IP address in the IP Address field.
5. Enter the TCP port used by the Radius server in the TCP Port field.
6. Select the authentication policy (PAP or CHAP) from the Authentication Type field.
7. Enter the shared secret in the Shared Secret field.
8. Enter the timeout timer value (in seconds) that specifies the amount of time to wait between
retries when the server is busy in the Timeout (Sec) field.
9. Enter the number of attempts to be made to reach a server before assuming it is unreachable
in the Attempts field.