Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

80 DCFM Professional Plus User Manual

53-1001356-01

Editing a call home center

NOTE

Call Home is supported on Windows systems for all modem call home centers and is supported on

Linux and Solaris for the E-mail call home centers.

To edit a call home center, select from the following procedures:

•Editing the Brocade International or IBM call home center . . . . . . . . . . . . . .80

•Editing the Brocade North America or HP Modem call home center. . . . . . . 81

•Editing an E-mail call home center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

•Editing the EMC call home center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

•Editing the HP LAN call home center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Editing the Brocade International or IBM call home center

To edit a Brocade International or IBM call home center, complete the following steps.

1. Select Monitor > Event Notification > Call Home.

The Call Home dialog box displays.

2. Select the call home center you want to edit (Brocade International or IBM) in the Call Home

Centers table.

3. Click Edit Centers (beneath the Call Home Centers table).

The Configure Call Home Center dialog box displays (Figure 29).

FIGURE 29 Configure Call Home Center Dialog Box (Brocade International or IBM option)

4. Make sure the call home center type you selected displays in the Call Home Centers list.

5. Select Enable to enable this call home center.

6. Set the time interval at which to check the call home center by selecting the Set the heartbeat

interval at ___ days (1-28) check box and entering the interval in the field.