Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

DCFM Professional Plus User Manual 81
53-1001356-01
Editing a call home center
3
7. Enter the primary phone number or extension of the call home center in the Call Home Center -
Primary Connection field.
8. Enter the backup phone number or extension of the call home center in the Call Home Center -
Backup Connection field.
9. Enter the phone number or extension of the local server in the Local Server - Phone Number
field.
10. Enter the identification number of the local server in the Local Server - Server ID field.
11. Click Send Test to test the phone number.
The selected call home center must be enabled to test the phone number.
A faked event is generated and sent to the selected call home center. You must contact the call
home center to verify that the event was received and in the correct format.
12. Click OK.
The Call Home dialog box displays with the call home center you edited highlighted in the Call
Home Centers table.
13. Click OK to close the Call Home dialog box.
Editing the Brocade North America or HP Modem call home center
Modem call home centers are available for Brocade and HP. To edit one of these call home centers,
complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Select the call home center you want to edit (Brocade North America or HP Modem) in the Call
Home Centers table.
3. Click Edit Centers (beneath the Call Home Centers table).
The Configure Call Home Center dialog box displays (Figure 30).
FIGURE 30 Configure Call Home Center Dialog Box (Brocade North America or HP Modem option)