Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

82 DCFM Professional Plus User Manual
53-1001356-01
Editing a call home center
3
4. Make sure the call home center type you selected displays in the Call Home Centers list.
5. Select Enable to enable this call home center.
6. Enter the phone number or extension of the call home center in the Call Home Center - Phone
Number field
7. Enter the phone number or extension of the local server in the Local Server - Phone Number
field.
8. Click Send Test to test the phone number.
The selected call home center must be enabled to test the phone number.
A faked event is generated and sent to the selected call home center. You must contact the call
home center to verify that the event was received and in the correct format.
9. Click OK.
The Call Home dialog box displays with the call home center you edited highlighted in the Call
Home Centers table.
10. Click OK to close the Call Home dialog box.
Editing an E-mail call home center
E-mail call home centers are available for Brocade, EMC, IBM, and SUN. To edit one of these call
home centers, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Select the call home center you want to edit (Brocade E-mail, EMC E-mail, IBM E-mail, or SUN
E-mail) in the Call Home Centers table.
3. Click Edit Centers (beneath the Call Home Centers table).
The Configure Call Home Center dialog box displays (Figure 31).
FIGURE 31 Configure Call Home Center Dialog Box (Brocade, EMC, IBM, or SUN E-mail option)
4. Make sure the call home center type you selected displays in the Call Home Centers list.