Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

DCFM Professional Plus User Manual 83
53-1001356-01
Editing a call home center
3
5. Select Enable to enable this call home center.
6. Enter the customer contact name in the Customer Details - Name field.
7. Ente r t h e c o mpany n a m e i n the Customer Details - Company field.
8. Enter the phone number of the customer contact in the Customer Details - Phone (Office) field.
9. Enter the mobile phone number of the customer contact in the Customer Details - Phone
(Mobile) field.
10. Enter the name of the server in the SMTP Server Settings - Server Name field.
11. Enter the port number of the server in the SMTP Server Settings - Port field.
12. Enter a user name in the SMTP Server Settings - Username field.
This is a required field when the SMTP server authentication is enabled.
13. Enter a password in the SMTP Server Settings - Password field.
This is a required field when the SMTP server authentication is enabled.
14. Enter the e-mail address for replies in the E-mail Notification Settings - Reply Address field.
15. Enter the customer e-mail address in the E-mail Notification Settings - Send To Address field.
16. Click Send Test to test the mail server.
The selected call home center must be enabled to test the mail server.
A faked event is generated and sent to the selected call home center. You must contact the call
home center to verify that the event was received and in the correct format.
17. Click OK.
The Call Home Configuration dialog box displays with the call home center you edited
highlighted in the Call Home Centers table.
18. Click OK to close the Call Home Configuration dialog box.