Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

130 DCFM Professional Plus User Manual
53-1001356-01
Memory allocation
3
Memory allocation
You can configure memory allocation for the client and server to improve performance. You can
trigger switch polling when a state changes or you can poll at intervals when no state change
occurs.
NOTE
SAN size is a consideration in selection of polling periods.
Configuring memory allocation settings
To configure memory allocation settings, complete the following steps.
1. Select SAN > Options.
The Options dialog box displays (Figure 47).
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
client.
FIGURE 47 Options Dialog Box (Memory Allocation option)
3. Enter the memory allocation (MB) for the client in the Client Memory Allocation field.
If you enter an invalid value, an error message displays with the minimum value (512 MB)
allowed. Click OK and edit the value again.