Manualshelf

Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

ManualsBrandsHP ManualsStorageHP 1606 FCIP 4-pt Enabled 8Gb FC 2-pt Enabled 1GbE Base Switch
161162163164165166167168169170
DCFM Professional Plus User Manual 133
53-1001356-01
Support mode
3
6. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after application restart.
7. Click OK on the “changes take effect after application restart” message.
Support mode
You can configure support settings to allow enhanced diagnostics.
Configuring support mode settings
To configure support mode settings, complete the following steps.
1. Select SAN > Options.
The Options dialog box displays (Figure 49).
FIGURE 49 Options Dialog Box (Support Mode option)
2. Select Support Mode in the Category list to enable or disable support modes.
NOTE
Only use this option when directed to by customer support.
3. Select the Log client support data - Log Level list, and select the type of log data you want to
configure.
Log level options include: All, Fatal, Error, Warn, Info, Debug, Trace, and Off. Default is Info.
The log level options return to the default value (Info) when the client or server is restarted.