Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

DCFM Professional Plus User Manual 143

53-1001356-01

Removing an option from a device’s shortcut menu

You can remove a tool that displays on a device’s shortcut menu.

To remove an option to the device’s shortcut menu, complete the following steps.

1. Select Tools > Setup.

The Setup Tools dialog box displays.

2. Click the Product Menu tab.

The Product Popup Menu Items table displays all configured menu options.

3. Select the menu item you want to remove in the Product Popup Menu Items table.

4. Click Remove.

5. Click OK to save your work and close the Setup Tools dialog box.

Starting third-party tools from the application

You can open third-party tools from the Tools menu or a device’s shortcut menu. Remember that

you cannot open a tool that is not installed on your computer. You must install the tool on your

computer and add the tool to the Tools menu or the device’s shortcut menu.

To open an application, perform the following steps.

1. Select the device.

2. Use one of the following techniques:

• Select Tools > Product Menu > <Tool_Name>.

• Select Tools > <Tool_Name>.

• Right-click the device, and select the tool from the menu.

If the third-party tool is a web-based application, you must enter the IP address of the

applications server as a parameter to be able to open the application. For step-by-step

instructions about entering the IP address of the server, refer to “Entering the server IP

address of a tool” on page 139.