Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

174 DCFM Professional Plus User Manual
53-1001356-01
Importing a configuration
5
Importing a configuration
1. Right-click a device in the Product List or the Connectivity Map, and select Configuration >
Configuration Repository.
The Switch Configuration Repository dialog box is displayed.
2. Click Import.
The file chooser appropriate to your operating system is displayed.
3. Use the file chooser to select the file from which you want to import the configuration, and click
Import.
Keeping a copy past the defined age limit
1. Right click a device in the Product List or the Connectivity Map, and select Configuration >
Configuration Repository.
The Switch Configuration Repository dialog box is displayed.
2. Select the check box under Keep for the configuration you want to preserve. The configuration
will be kept until it is manually deleted, or until the Keep check box is cleared to enable the age
limit again.
3. Click OK.
Replicating configurations
You can replicate a switch SNMP configuration, the Fabric Watch configuration, Trace Destination
configuration, or the entire configuration.
Right-click a device in the Product List or the Connectivity Map, and select Configuration >
Replicate > Configuration.
A wizard is launched to guide you through the process.
Replicating security configurations
You can replicate an AD/LDAP Server, DCC, IP, RADIUS Server, or SCC security policy.
Right-click a device in the Product List or the Connectivity Map, and select Configuration >
Replicate > Security.
A wizard is launched to guide you through the process.