Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

184 DCFM Professional Plus User Manual
53-1001356-01
HBA server mapping
5
7. If you configured an external server (in the Options dialog box), choose from one of the
following options:
Select External FTP Server to download from the external FTP server.
Select SCP Server to download from the external SCP server.
8. Enter the path to the firmware directory (only displays if external server is configured in Options
dialog box).
9. Click Download.
While the firmware is downloaded to the device, the Status column displays the current
download status. Once firmware download is complete, the Message column displays whether
the download was a success or failure.
HBA server mapping
HBAs and servers discovered through a fabric can be easily identified in the topology by their
product icons. For a list of products and their icons, refer to “Product icons” on page 18. Once
identified in the topology, you can create servers and assign the HBAs to them and import an
externally created HBA server mapping file (.CSV) to the Management application.
NOTE
The Management application now enables you to map HBAs from multiple fabrics (previous versions
limited HBA mapping to one fabric).
The Management application also enables you to discover hosts directly using Host discovery (for
step-by-step instructions, refer to “Host discovery” on page 47). If you discover a host directly, when
you open the HBA Server Mapping dialog box the Management application automatically groups all
HBAs under the host.
If you create a new HBA server and associate HBAs to it, then you try to discover a host with the
same HBAs using Host discovery, the HBA’s discovered using host discovery must match the HBAs
associated to the HBA server exactly; otherwise, Host discovery will fail.