Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)
202 DCFM Professional Plus User Manual
53-1001356-01
Editing thresholds
5
6. Change the number of port events allowed for the threshold in the Threshold field, if
necessary.
7. Change the time period for the threshold from the errors per list, if necessary.
8. Click OK on the Edit Invalid Words Threshold dialog box.
If the threshold has already been assigned to ports, an “Are you sure you want to make the
requested changes to this threshold on “X” ports?” message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 198.
9. Click OK on the Port Fencing dialog box.
Editing a Link threshold
To edit a Link threshold, complete the following steps.
1. Select Configure > Port Fencing.
The Port Fencing dialog box displays.
2. Select Link from the Violation Type list.
3. Click Edit.
The Edit Link Threshold dialog box displays.
4. Change the name for the threshold in the Name field, if necessary.
5. Change the number of link events allowed for the threshold from the Threshold errors list.
6. Select the time period for the threshold (in minutes) from the errors per list.
7. Click OK on the Edit Link Threshold dialog box.
If the threshold has already been assigned to ports, an “Are you sure you want to make the
requested changes to this threshold on “X” ports?” message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 198.
8. Click OK on the Port Fencing dialog box.
Editing a Link Reset threshold
NOTE
This threshold is only available for Fabric OS devices.
To edit a Link Reset threshold, complete the following steps.
1. Select Configure > Port Fencing.
The Port Fencing dialog box displays.
2. Select Link Reset (FOS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
The Edit Link Reset Threshold dialog box displays.
4. Change the name for the threshold in the Name field, if necessary.