Manualshelf

Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

ManualsBrandsHP ManualsStorageHP 1606 FCIP 4-pt Enabled 8Gb FC 2-pt Enabled 1GbE Base Switch
231232233234235236237238239240
DCFM Professional Plus User Manual 203
53-1001356-01
Editing thresholds
5
5. Select one of the following options:
• Default—Uses device defaults. Go to step 8.
• Custom—Uses your selections. Continue with step 6.
6. Change the number of port events allowed for the threshold in the Threshold field, if
necessary.
7. Change the time period for the threshold from the errors per list, if necessary.
8. Click OK on the Edit Link Reset Threshold dialog box.
If the threshold has already been assigned to ports, an “Are you sure you want to make the
requested changes to this threshold on “X” ports?” message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 198.
9. Click OK on the Port Fencing dialog box.
Editing a Protocol Error threshold
To edit a Protocol Error threshold, complete the following steps.
1. Select Configure > Port Fencing.
The Port Fencing dialog box displays.
2. Select Protocol Error from the Violation Type list.
3. Select the threshold you want to change and click Edit.
The Edit Protocol Error Threshold dialog box displays.
4. Change the name for the threshold in the Name field, if necessary.
5. (M-EOS devices only) Change the M-EOS Protocol Error thresholds by completing the following
steps.
a. Change the number of protocol errors allowed for the threshold from the Threshold errors
list, if necessary.
b. Change the time period for the threshold (in minutes) from the errors per list, if necessary.
6. (Fabric OS devices only) Change the FOS Protocol Error thresholds by completing the following
steps.
a. Select one of the following options:
• Default—Uses device defaults. Go to step 7.
• Custom—Uses your selections. Continue with step b.
b. Change the number of protocol errors allowed for the threshold from the Threshold errors
list, if necessary.
c. Change the time period for the threshold from the errors per list, if necessary.