Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

204 DCFM Professional Plus User Manual
53-1001356-01
Editing thresholds
5
7. Click OK on the Edit Protocol Error Threshold dialog box.
If the threshold has already been assigned to ports, an “Are you sure you want to make the
requested changes to this threshold on “X” ports?” message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 198.
8. Click OK on the Port Fencing dialog box.
Editing a State Change threshold
NOTE
This threshold is only available for Fabric OS devices running 6.3 or later.
To edit an State Change threshold, complete the following steps.
1. Select Configure > Port Fencing.
The Port Fencing dialog box displays.
2. Select State Change (FOS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
The Edit State Change Threshold dialog box displays.
4. Change the name for the threshold in the Name field, if necessary.
5. Select one of the following options:
• Default—Uses device defaults. Go to step 8.
• Custom—Uses your selections. Continue with step 6.
6. Edit the number of state changes allowed for the threshold in the Threshold errors field, if
necessary.
7. Change the time period for the threshold from the errors per list, if necessary. The following
choices are available:
• None—the port is blocked as soon as the specified number of invalid CRCs allowed is met.
• Second—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a second.
• Minute—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a minute.
• Hour—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a hour.
• Day—the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a day.
8. Click OK to add the state change threshold to the table and close the Edit State Change
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 198.
9. Click OK on the Port Fencing dialog box.