Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

212 DCFM Professional Plus User Manual

53-1001356-01

Filtering port connectivity

To filter results from the port connectivity view, complete the following steps.

1. Click the Filter link from the Port Connectivity View dialog box

The Filter dialog box displays (Figure 68).

FIGURE 68 Filter Dialog Box

2. Click a blank cell in the Field column to select the property from which to filter the results.

3. Click a blank cell in the Relation column to select an action operation.

The following actions are available:

• ==

• !=

• <

• >

• <=

• >=

• contains

• matches

4. Define a filter by entering a value that corresponds to the selected property in the Value

column.

5. Repeat steps 2 through 4 as needed to define more filters.

6. Click OK.

The Port Connectivity View dialog box displays. If filtering is already enabled, only those ports

that meet the filter requirements display. To enable the filter, select the Filter check box.