Manualshelf

Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

ManualsBrandsHP ManualsStorageHP 1606 FCIP 4-pt Enabled 8Gb FC 2-pt Enabled 1GbE Base Switch
341342343344345346347348349350
DCFM Professional Plus User Manual 311
53-1001356-01
Chapter
9
Reports
In this chapter
•Report types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
•Generating reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
•Viewing reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
•Exporting reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
•Printing reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313
•Deleting reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
•Generating performance reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
•Generating zoning reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
Report types
Presenting and archiving data about a SAN is equally as important as gathering the data. Through
the Management application, you can generate reports about the SAN. You can send the reports to
network administrators, support consultants, and others interested in the SAN’s architecture, or
archive them for future reference.
The following standard report types are available from the Generate Reports dialog box:
• Fabric Ports. Lists discovered ports including used and unused ports. Port data for each fabric
is divided into three parts: Fabric-wide port details, Switch-wide port details, and individual
port details.
• Fabric Summary. Lists information about discovered fabrics including fabric and switch details,
device information, and ISL and trunk summary.
The following device specific report available through the Monitor menu and right-click menus:
• Performance. Lists historical performance-related data.
• Zone. Lists zoning objects.