Data Center Fabric Manager Professional Plus User Manual - Supporting DCFM 10.3.x (53-1001356-01, October 2009)

DCFM Professional Plus User Manual 13
53-1001356-01
Connectivity Map
1
DRAFT: BROCADE CONFIDENTIAL
Connectivity Map
The Connectivity Map, which displays in the upper right area of the main widow, is a grouped map
that shows physical and logical connectivity of SAN components, including discovered and
monitored devices and connections. These components display as icons in the Connectivity Map.
For a list of icons that display in the Connectivity Map, refer to the following tables:
• “Product icons” on page 18
• “Group icons” on page 19
• “Product status icons” on page 20
The Management application displays all discovered fabrics in the Connectivity Map by default. To
display a discovered Host in the Connectivity Map, you must select the Host in the Product List. You
can only view one Host and physical and logical connections at a time.
Toolbox
The toolbox (Figure 4) is located at the top right side of the View window and provides tools to zoom
in and out of the Connectivity Map, collapse and expand groups, and fit the topology to the window.
FIGURE 4 The Toolbox
1. Zoom In. Use to zoom in on the Connectivity Map
2. Zoom Out. Use to zoom out on the Connectivity Map.
3. Fit in View. Use to scale the map to fit within the Connectivity Map area.
4. Expand. Use to expand the map to show all ports in use on a device.
5. Collapse. Use to collapse the map to show only devices (hides ports).