Quick Start Guide A7000 dl Analog Modem Backup Module (J8462A) 2006-05

Quick Start Guide 5991-2108

ProCurve Secure Router dl Analog Modem Backup

Module

ANALOG MODEM BACKUP MODULE COMMANDS

alias <text>

Comment line to provide the text name assigned by the SNMP network

management system.

caller-id override [always <number> | if-no-CID <number>]

Configures the unit to replace caller ID information with a user-specified

number. Use the no form of this command to disable any caller ID overrides.

always <number> Always forces replacement of the incoming

caller ID number with the number given.

if-no-CID <number> Always forces replacement of the incoming

caller ID number with the number given.

description <text>

Comment line to provide an identifier for this interface (for example, circuit

ID, contact information, etc.).

<text> Shows up to 80 alphanumeric characters.

dialin

Enables the modem for remote console dial-in access, disabling the use of

the modem for backup.

init-string <string>

Specifies an initialization string for the modem using standard AT

commands. Use the no form of this command to return to the default

initialization string.

<string> Initialization string using standard AT

commands. This string must start with AT and

cannot contain spaces. The default string is

ATE0Q0V1X4\N0.

shutdown

Disables the interface (both physical and virtual) so that no data will be

passed through. Use the no form of this command to turn on the interface

and allow it to pass data. By default, all interfaces are disabled.

Note

This command list is an illustration of available

commands. For complete command descriptions and

default values, refer to the SROS Command Line

Interface Reference Guide provided on your ProCurve

SROS Documentation CD.