xl Modules Installation Guide 2007-12

2
ProCurve Switch xl Modules
Descriptions
ProCurve Switch
PoE xl Module
(J8161A)
2
24 10/100-TX ports and when
connected to a ProCurve 600
Redundant and External Power
Supply (J8168A), can provide
Power over Ethernet (PoE) power
to 802.3af compliant devices.
ProCurve Switch
10/100/1000-T xl
Module (J4907A)
3
The following ProCurve mini-GBICs are supported by the 10/100/1000-T xl Module (as
of this printing):
• Gigabit-SX LC mini-GBIC (J4858A, J4858B, J4858C)
• Gigabit-LX LC mini-GBIC (J4859A, J4859B, J4859C)
• Gigabit-LH LC mini-GBIC (J4860A, J4860B, J4960C)
• The Gigabit 1000Base-T mini-GBIC (J8177B) is not supported on the
10/100/1000-T xl Module (J4907A).
14 twisted-pair ports with RJ-45
connectors for 10/100/1000 Mbps
(Gigabit) or 100 Mbps operation
over Category 5 or better 100-ohm
UTP or STP cable (category 5e
recommended for Gigabit) -- all
ports have the IEEE 802.3ab Auto
MDI/MDI-X feature, and 2 slots for
installing any sup-ported ProCurve
mini-
GBICs.
ProCurve Switch
Access Controller xl
Module (J8162A)
4
Note
WARNING
There are no ports on the J8162A.
It operates as a wireless access
controller. Wireless traffic is
directed to this module using
VLAN’s. For configuration
information see your ProCurve
Series 5300xl Switches
Installation and Getting Started
Guide, Chapter 3, “Getting Started
with Switch Configuration”.
This product contains a Lithium coin-type battery (type CR2032) that requires special handling
at end-of-life. The battery can explode or cause burns if disassembled, charged, or exposed to
water, fire or high temperature. After replacing the battery, properly dispose of used battery.
Module Description
Std PoE
PoE
EPS
Status
LED Mode
Link
Mode
Link
Mode
1
2
3
4
5
6
13 14
15
16
17 18
23
2221
20
19
12
11
10
9
8
7
PoE-Ready 10/100-TX Ports (1-24)  all ports are HP Auto-MDIX
24
hp procurve
PoE
xl module
J8161A
xl
module
PoE
Due to power consumption, no more than two of the follow-
ing modules may be installed in a chassis: J8162A, J9001A,
or J9003A.