HP 4x Fabric Copper Cable Minimum Bend Radius

Read This First
HP 4x Fabric Copper Cable Minimum
Bend Radius
Handling or installing an InfiniBand technology cable in a manner that results in
a tight bend radius or excessive twisting can result in immediate or latent failure
of the cable. The table and sketch below show the minimum bend radius to
prevent problems with the HP 1m 4x Fabric Copper Cable (376229-001), HP
3m 4x Fabric Copper Cable (376229-002), and HP 5m 4x Fabric Copper Cable
(376229-003).
Part number Length R1 – Minimum bend
radius at the connector
R2 – Minimum bend radius
away from a connector
376229-001 1m > 4.6" (11.68 cm) > 2.3" (5.84 cm)
376229-002 3m > 4.6" (11.68 cm) > 2.3" (5.84 cm)
376229-003 5m > 4.6" (11.68 cm) > 2.3" (5.84 cm)
© Copyright 2004 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein.
The information in this document is provided “as is” without warranty of any kind and is subject to change
without notice. The warranties for HP products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as constituting an additional warranty.
First Edition (November 2004)
Part Number 380430-001
380430-001
Read This First
HP 4x Fabric Copper Cable Minimum
Bend Radius
Handling or installing an InfiniBand technology cable in a manner that results in
a tight bend radius or excessive twisting can result in immediate or latent failure
of the cable. The table and sketch below show the minimum bend radius to
prevent problems with the HP 1m 4x Fabric Copper Cable (376229-001), HP
3m 4x Fabric Copper Cable (376229-002), and HP 5m 4x Fabric Copper Cable
(376229-003).
Part number Length R1 – Minimum bend
radius at the connector
R2 – Minimum bend radius
away from a connector
376229-001 1m > 4.6" (11.68 cm) > 2.3" (5.84 cm)
376229-002 3m > 4.6" (11.68 cm) > 2.3" (5.84 cm)
376229-003 5m > 4.6" (11.68 cm) > 2.3" (5.84 cm)
© Copyright 2004 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein.
The information in this document is provided “as is” without warranty of any kind and is subject to change
without notice. The warranties for HP products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as constituting an additional warranty.
First Edition (November 2004)
Part Number 380430-001
380430-001