Installation Guide for fl Modules 2007-02

ProCurve Switch fl Modules
Installing Modules
LED Color State Meaning
10-Port mini-GBIC Module (J8735A) (Continued)
Status n/a
Green
Green
Orange
Off
Flashing
Solid
Flashing
No power is reaching the module.
LED is solid green to flashing green during
boot up. Solid green indicates that the module
is loading the system image.
Software image loaded successfully.
Self-test failure.
X2 10GbE Interface Modules (J8736A and J8737A)
Link Green
Orange
n/a
Solid
Flashing
Off
Link is up.
Self-test failure or unsupported transceiver.
See Error Log for details.
No connector is plugged into the port.
Activity (Act) Green
Green
n/a
Flashing
Solid
Off
Transmitting data. Blink rate indicates traffic
utilization of the port.
Traffic exceeds 90% of link capacity.
No connector is plugged into the port, or no
traffic is being passed through the port.
Link and
Activity (both
port LEDs
together)
Orange/
Green/Off
Solid
Orange
(0.5 secs),
then Solid
Green (1.5
secs), and
then Off
A transceiver has been correctly inserted
into the transceiver port. After the insertion
test, the LEDs will remain Off until a network
cable is inserted into the transceiver and the
LEDs follow their normal operational
behavior.
Link, Activity
and Status (all
module LEDs
together)
Orange/
Green/Off
Solid
Orange
(0.5 secs),
then Solid
Green (1.5
secs), and
then Off
The module is receiving initial power due to
being inserted into the slot, and/or due to the
slot being enabled via the CLI.
Status n/a
Green
Green
Yellow/
Orange
Off
Flashing
Solid
Flashing
No power to the module.
Module is powering up and downloading
operating software.
Software image loaded successfully.
Self-test failure.
22