Installation Guide for fl Modules 2007-02

ProCurve Switch fl Modules
Installing and Removing mini-GBICs
To remove a mini-GBICs with a wire bail:
1. Remove the fiber cable from the mini-GBIC.
2. Lower the bail until it is approximately horizontal.
mini-GBIC with
wire bail release
ProCurve mini-GBIC
Installed Position
Locking tab
Socket
Bail
Locking tab releases from socket
Release
ProCurve mini-GBIC
1. Pull bail out
to unlatch
ProCurve mini-GBIC
Remove
2. Remove from socket
3. Using the bail, pull the mini-GBIC out of the slot.
4. If the mini-GBIC is not defective (disposable), protect it by inserting a dust
plug.
30