Installation Guide for fl Modules 2007-02

ProCurve Switch fl Modules

Specifications

Environmental

Operating Non-Operating

Temperature: 5°C to 40°C (41°F to 104°F) -40°C to 70°C (-40°F to 158°F)

Relative humidity: 15% to 80% (@40°C, 24 hours) 90% (@ 65°C, 12 hours)

(non-condensing)

Maximum altitude: 3.0 Km (10,000 ft) 4.6 Km (15,000 ft)

Lasers

The Gigabit-SX, Gigabit-LX, and Gigabit-LH mini-GBICs, which can be

installed in the 10-Port mini-GBIC Module, are Class 1 Laser Products.

Laser Klasse 1. These mini-GBICs comply with IEC 825-2: 1993.

The following transceivers, that can be installed in the X2 10-Gbe Modules

(J8736A and J8737A), are Class 1 Laser Products.

Laser Klasse 1:

■ The 10-GbE X2-SC SR transceiver

■ The 10-GbE X2-SC LR transceiver

■ The 10-GbE X2-SC ER transceiver

The transceivers comply with IEC 825-2: 1993.

Connectors and Cables

Twisted-Pair

■ 10/100Base-T RJ-45 connectors on the Management Module are

compatible with the IEEE 802.3 10Base-T and 802.3u 100Base-TX stan-

dards and accept the 10 Mbps or 100 Mbps cables listed in Table 5.

■ 100/1000Base-T RJ-45 connectors on the 10-Port 100/1000Base-T Inter-

face Module are compatible with the IEEE 802.3u 100Base-TX and IEEE

802.3ab 1000Base-T standards, and accept the 100 Mbps or 1000 Mbps

cables listed in Table 5.