Installation Guide HP Procurve Switch xl Modules

1
HP Procurve Switch XL Modules
Descriptions
HP Procurve Switch XL Modules
For the HP Procurve Series 5300XL Switches
Descriptions
The HP Procurve Switch XL Modules are components that you can add to an
HP Procurve XL switch to provide a variety of network connectivity options.
The following modules are available as of this printing:
Contact your HP-authorized networking products reseller or your HP repre-
sentative for information on availability of other modules and mini-GBICs. You
can also visit the HP networking products Web site at http://www.hp.com/go/
hpprocurve to get more information.
Module Description
HP Procurve Switch
10/100-TX XL Module
(J4820A)
24 twisted-pair ports with RJ-45
connectors for 10 Mbps or 100
Mbps operation over 100-ohm
unshielded (UTP) or shielded (STP)
twisted-pair cable -- all ports have
the HP Auto-MDIX feature.
HP Procurve Switch
100/1000-T XL Module
(J4821A)
4 twisted-pair ports with RJ-45
connectors for 1000 Mbps
(Gigabit) or 100 Mbps operation
over Category 5 or better 100-ohm
UTP or STP cable (category 5E
recommended for Gigabit) -- all
ports have the IEEE 802.3ab Auto
MDI/MDI-X feature.
HP Procurve Switch
mini-GBIC XL Module
(J4878A)
4 slots for installing any of the
supported HP Procurve mini-
GBICs*.
* Supported mini-GBICs: The following HP Procurve mini-GBICs are supported by the mini-GBIC XL Module (as of this
printing):
• Gigabit-SX LC mini-GBIC (J4858A)
• Gigabit-LX LC mini-GBIC (J4859A)
hp procurve
10
/ 100 -TX
xl module
J4820A
xl
module
432
Link|Mode
1
4321
100/1000Base-T Ports
hp procurve
100/1000-T
xl module
J4821A
xl
module
hp procurve
mini-GBIC
xl module
J4878A
4321
Mode
Link
1
Mode
Link
1
2
3
4
xl
module
Alp3_mod.book Page 1 Tuesday, April 2, 2002 2:40 PM