Brocade Converged Enhanced Ethernet Administrator's Guide v6.1.2_cee (53-1001258-01, June 2009)
Table Of Contents
- Contents
- Figures
- Tables
- About This Document
- Introducing FCoE
- Using the CEE CLI
- In this chapter
- CEE CLI configuration guidelines and restrictions
- Using the CEE command line interface (CLI)
- CEE CLI RBAC permissions
- Accessing the CEE CLI through the console interface or through a Telnet session
- Accessing the CEE CLI from the Fabric OS shell
- Accessing CEE CLI command modes
- Using CEE CLI keyboard shortcuts
- Displaying CEE CLI commands and command syntax
- Using CEE CLI command completion
- CEE CLI command syntax conventions
- Using CEE CLI command output modifiers
- Configuring VLANs Using the CEE CLI
- In this chapter
- VLAN overview
- Ingress VLAN filtering
- VLAN configuration guidelines and restrictions
- Default VLAN configuration
- VLAN configuration procedures
- Enabling and disabling a CEE interface
- Configuring the MTU on a CEE interface
- Creating a VLAN interface
- Configuring a VLAN interface to forward FCoE traffic
- Configuring a CEE interface as a Layer 2 switch port
- Configuring a CEE interface as an access interface or a trunk interface
- Configuring VLAN classifier rules
- Configuring VLAN classifier groups
- Associating a VLAN classifier group to a CEE interface
- Clearing VLAN counter statistics
- Displaying VLAN information
- Configuring the MAC address table
- Configuring STP, RSTP, and MSTP using the CEE CLI
- In this chapter
- STP overview
- RSTP overview
- MSTP overview
- STP, RSTP, and MSTP configuration guidelines and restrictions
- Default STP, RSTP, and MSTP configuration
- STP, RSTP, and MSTP configuration procedures
- STP, RSTP, and MSTP-specific configuration procedures
- STP and RSTP-specific configuration procedures
- RSTP and MSTP-specific configuration procedures
- MSTP-specific configuration procedures
- 10-Gigabit Ethernet CEE interface-specific configuration
- Global STP, RSTP, and MSTP-related configuration procedures
- Clearing STP, RSTP, and MSTP-related information
- Displaying STP, RSTP, and MSTP-related information
- Configuring Link Aggregation using the CEE CLI
- Configuring LLDP using the CEE CLI
- Configuring ACLs using the CEE CLI
- In this chapter
- ACL overview
- Default ACL configuration
- ACL configuration guidelines and restrictions
- ACL configuration procedures
- Creating a standard MAC ACL and adding rules
- Creating an extended MAC ACL and adding rules
- Modifying a MAC ACL
- Removing a MAC ACL
- Reordering the sequence numbers in a MAC ACL
- Applying a MAC ACL to a CEE interface
- Applying a MAC ACL to a VLAN interface
- Clearing MAC ACL counters
- Displaying MAC ACL information
- Configuring QoS using the CEE CLI
- Configuring FCoE using the Fabric OS CLI
- Administering the switch
- Configuring RMON using the CEE CLI
- Index
126 Converged Enhanced Ethernet Administrator’s Guide
53-1001258-01
FCoE configuration procedures
9
Displaying FCoE configuration-related information
Perform the following tasks to display FCoE-related configuration information:
Managing and displaying the FCoE login configuration
In this section:
•Enabling or disabling FCoE login configuration management . . . . . . . . . . 126
•Displaying or aborting the current configuration transaction. . . . . . . . . . . 127
•Cleaning up login groups and VN_port mappings. . . . . . . . . . . . . . . . . . . . 127
•Displaying the FCoE login configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
•Saving the current FCoE configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Enabling or disabling FCoE login configuration management
Perform the following tasks to enable or disable FCoE login configuration management:
Task Command
Display the embedded FCoE port configuration.
Configurations of all the ports are displayed if you
do not specify a specific port.
switch:admin> fcoe --cfgshow [port]
Display information about devices logged into a
specific FCoE F_port.
switch:admin> fcoe --loginshow port
Display FIP configurations. switch:admin> fcoe --fipcfgshow
Task Command
Enable the FCoE login configuration management
on the switch (this is a switch-based command,
not port-based). This allows only configured
Enode VN_ports to log in. Use the fcoelogingroup
command to configure allowed Enode VN_ports.
The default is disabled.
switch:admin> fcoelogincfg --enable
Disable the FCoE login configuration
management on the switch. This allows
unrestricted login on Enode VN_ports.
switch:admin> fcoelogincfg --disable