Brocade Converged Enhanced Ethernet Administrator's Guide v6.1.2_cee (53-1001258-01, June 2009)

Converged Enhanced Ethernet Administrator’s Guide 135
53-1001258-01
Flash file management commands
10
Flash file management commands
Table 25 describes the tasks used to manage the files in Flash.
Perform the following tasks from Privileged EXEC mode.
Debugging and logging commands
Table 26 describes the tasks related to debugging and logging commands.
Perform the following tasks from Privileged EXEC mode.
TABLE 25 CEE Flash memory file management commands
Task Command
List the files in the Flash memory directory. switch#dir
Delete a file from the Flash memory directory. switch#delete [flash://]filename
or
switch#delete filename
Erase all the files in the Flash memory directory.
NOTE: This command erases all the files in the
Flash directory except the default
startup-configuration file which is
programmed as a manufacturing default.
switch#erase flash
% Warning: Erasing flash filesystem will
remove all files in flash://.
Continue to erase?(y/n):
Rename a file in the Flash. switch#rename [flash://]filename
[flash://]new_filename
or
switch#rename filename new_filename
Display the contents of a file in the Flash memory
directory.
switch#show file [flash://]filename
or
switch#show file filename
TABLE 26 Debugging and logging commands
Task Command
Display debugging information for CEE
components.
switch#show debugging
Display logging information for CEE components. switch#show logging
Display RAS trace information for CEE
components.
switch#show debugging trace all
Display the collection of information needed for
technical support
switch#show tech-support
NOTE: The supportsave command in Fabric OS includes the debugging data provided by the above commands.