Brocade Converged Enhanced Ethernet Administrator's Guide v6.1.2_cee (53-1001258-01, June 2009)
Table Of Contents
- Contents
- Figures
- Tables
- About This Document
- Introducing FCoE
- Using the CEE CLI
- In this chapter
- CEE CLI configuration guidelines and restrictions
- Using the CEE command line interface (CLI)
- CEE CLI RBAC permissions
- Accessing the CEE CLI through the console interface or through a Telnet session
- Accessing the CEE CLI from the Fabric OS shell
- Accessing CEE CLI command modes
- Using CEE CLI keyboard shortcuts
- Displaying CEE CLI commands and command syntax
- Using CEE CLI command completion
- CEE CLI command syntax conventions
- Using CEE CLI command output modifiers
- Configuring VLANs Using the CEE CLI
- In this chapter
- VLAN overview
- Ingress VLAN filtering
- VLAN configuration guidelines and restrictions
- Default VLAN configuration
- VLAN configuration procedures
- Enabling and disabling a CEE interface
- Configuring the MTU on a CEE interface
- Creating a VLAN interface
- Configuring a VLAN interface to forward FCoE traffic
- Configuring a CEE interface as a Layer 2 switch port
- Configuring a CEE interface as an access interface or a trunk interface
- Configuring VLAN classifier rules
- Configuring VLAN classifier groups
- Associating a VLAN classifier group to a CEE interface
- Clearing VLAN counter statistics
- Displaying VLAN information
- Configuring the MAC address table
- Configuring STP, RSTP, and MSTP using the CEE CLI
- In this chapter
- STP overview
- RSTP overview
- MSTP overview
- STP, RSTP, and MSTP configuration guidelines and restrictions
- Default STP, RSTP, and MSTP configuration
- STP, RSTP, and MSTP configuration procedures
- STP, RSTP, and MSTP-specific configuration procedures
- STP and RSTP-specific configuration procedures
- RSTP and MSTP-specific configuration procedures
- MSTP-specific configuration procedures
- 10-Gigabit Ethernet CEE interface-specific configuration
- Global STP, RSTP, and MSTP-related configuration procedures
- Clearing STP, RSTP, and MSTP-related information
- Displaying STP, RSTP, and MSTP-related information
- Configuring Link Aggregation using the CEE CLI
- Configuring LLDP using the CEE CLI
- Configuring ACLs using the CEE CLI
- In this chapter
- ACL overview
- Default ACL configuration
- ACL configuration guidelines and restrictions
- ACL configuration procedures
- Creating a standard MAC ACL and adding rules
- Creating an extended MAC ACL and adding rules
- Modifying a MAC ACL
- Removing a MAC ACL
- Reordering the sequence numbers in a MAC ACL
- Applying a MAC ACL to a CEE interface
- Applying a MAC ACL to a VLAN interface
- Clearing MAC ACL counters
- Displaying MAC ACL information
- Configuring QoS using the CEE CLI
- Configuring FCoE using the Fabric OS CLI
- Administering the switch
- Configuring RMON using the CEE CLI
- Index
38 Converged Enhanced Ethernet Administrator’s Guide
53-1001258-01
Configuring the MAC address table
3
Displaying MAC address table entries
To display MAC address table entries, perform the following tasks from Privileged EXEC mode:
Task Command
Display MAC address table entries. Syntax is
as follows:
• address—MAC address
• aging-time—Displays the aging time.
• count—Displays the count of forwarding
entries.
• dynamic—Displays the dynamic MAC
addresses.
• interface—Displays the forwarding
information for an interface.
• linecard—Displays the line card
information.
• static—Displays the static MAC
addresses.
• vlan—Displays the forwarding
information for a VLAN.
show mac-address-table
[address mac_address]
[aging-time]
[count [address mac_address] [dynamic [address
mac_address] [interface {port-channel number |
tengigabitethernet slot/port}] [vlan number]]
[interface {port-channel number | tengigabitethernet
slot/port}] [static [address mac_address | interface
{port-channel number | tengigabitethernet slot/port} |
vlan number] vlan number]]
[dynamic [address mac_address | interface
{port-channel number | tengigabitethernet slot/port} |
vlan number]]
[interface {
port-channel number | tengigabitethernet
slot/port}]
[linecard interface tengigabitethernet slot/port]
[static [address mac_address | interface {port-channel
number | tengigabitethernet slot/port} | vlan number]]
[vlan number]