Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)

Converged Enhanced Ethernet Command Reference 129

53-1001217-01

clear spanning-tree counter

Clears all spanning-tree counters on the interface.

Synopsis clear spanning-tree counter [interface| port-channel number | tengigabitethernet slot/port]

Operands interface Specifies the interface on which to clear the spanning-tree counters.

port-channel number

Specifies the port-channel number. The range of valid values is 1-63.

tengigabitethernet Specifies a valid 10 Gbps Ethernet interface.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults There are no default configurations for this command.

Command

Modes

Privileged EXEC Mode

Description Use this command to clear the spanning-tree counters on the interface.

Usage

Guidelines

If the interface operand is not specified, spanning-tree counters are cleared for all interfaces.

Examples To clear spanning-tree counters for all interfaces:

switch#clear spanning-tree counter

To clear spanning-tree counters for a tengigabitethernet interface:

switch#clear spanning-tree counter interface tengigabitethernet 0/1

To clear spanning-tree counters for port-channel 23:

switch#clear spanning-tree counter interface port-channel 23