DCFM Professional Plus User Manual (53-1001774-01, June 2010)
DCFM Professional Plus User Manual 73
53-1001774-01
3
5. Select the Product tab (Figure 34) and complete the following steps to select the product
properties you want to display on flyover.
FIGURE 33 Options dialog box (Flyovers option, Product tab)
a. Select each property you want to display in the product flyover from the Available
Properties table.
The available product properties include the following options:
b. Click the right arrow to move the selected properties to the Selected Properties table.
c. Use the Move Up and Move Down buttons to reorder the properties in the Selected
Properties table, if necessary.
The properties displayed in the Selected Properties table appear in the flyover display.
• Name
• Device Type
• WWN
• IP Address
• Domain ID
• Class
• Tag#
• Serial #
• Vendor
• Model #
• Port Count
• Seed Switch
• Firmware
• Location
• Contact
• Description
• Management Link
• Operational Status
• Enclosure
• Reason
• FID
• Base Fabric for Transport
• Base Switch