DCFM Professional Plus User Manual (53-1001774-01, June 2010)
86 DCFM Professional Plus User Manual
53-1001774-01
3
Software Configuration
The Management application allows you to configure the following software settings:
• Client export port—A port for communication between the client and server.
• Discovery—HTTP or HTTP over SSL when connecting to the switch.
• FTP/SCP overview—Internal or external FTP server settings.
• IP Configuration—Configure the Ethernet ports with the IP address.
• Memory allocation—Memory allocation for the client and server.
• Server port—Server port settings.
• Support mode—Support settings to allow enhanced diagnostics.
Client export port
You can configure a port for communication between the client and server.
Configuring the client export port
To configure client export port settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays (Figure 38).
FIGURE 38 Options dialog box (Client Export Port option)
2. Select Client Export Port to assign a communications port between the client and server in the
Category list.