DCFM Professional Plus User Manual (53-1001774-01, June 2010)

172 DCFM Professional Plus User Manual
53-1001774-01
7
1. Click the Authentication tab.
FIGURE 70 Authentication tab
2. Select the Enable Client Mutual Authentication check box, as needed.
If the check box is checked, CIM client mutual authentication is enabled. If the check box is
clear (default), client mutual authentication is disabled.
3. Select the Enable Indication Mutual Authentication check box, as needed.
If the check box is checked, indication mutual authentication is enabled. If the check box is
clear (default), client mutual authentication is disabled.
4. Click Apply.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
5. Click Close to close the SMIA Configuration Tool dialog box.