DCFM Professional Plus User Manual (53-1001774-01, June 2010)

190 DCFM Professional Plus User Manual
53-1001774-01
8
• FC Ports
• GigE Ports
• IP Ports
• iSCSI Ports
• POM
• Remote Ports
• SFP
• Virtual Sessions Ports
• Virtual FCoE Ports
Depending on the device type, some of the properties listed in the following table may not be
available for all products.
TABLE 11 Device properties
Field/Component Description
Addressing Mode The addressing mode of the switch.
Back to Edge Routing Support Whether back to edge routing is supported.
Bandwidth The bandwidth of the FCIP tunnel.
Capability The node capability.
Compression Whether compression is On or Off for the FCIP tunnel.
Connected Virtual FCoE Port The fabric name, switch name, and virtual FCoE port number of the
connected virtual FCoE port.
Contact The primary contact at the customer site.
Contributors The device contributors.
Device Type Whether the device is an initiator or target.
Description A description of the customer site.
Destination IP Address The IP address of the of the FCIP tunnel destination device.
Discovery Status The discovery status of the switch. Examples include ‘Discovered: Seed
Switch’ and ‘Discovered: Not Reachable’.
Domain ID The device’s domain ID, which is the top-level addressing hierarchy of
the domain.
Fabric The fabric name.
Fabric Name The name specified through the device Element Manager.
Fabric Watch Whether Fabric Watch is up or down.
Fastwrite Whether fastwrite is On or Off for the FCIP tunnel.
FC Port The FC port of the FCIP tunnel.
FCoE Capable Whether the device is Fibre Channel over Ethernet capable.
FCS Role Whether FCS is supported.
Firmware The firmware version.
GigE Port The GigE port of the FCIP tunnel.
Host Name The Host name.