DCFM Professional Plus User Manual (53-1001774-01, June 2010)

DCFM Professional Plus User Manual 385
53-1001774-01
15
Deleting an LLDP profile
1. Select Configure > Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the LLDP-DCBX tab on the Edit Switch dialog box.
The LLDP Profile dialog box displays.
4. Select an existing LLDP Profile from the LLDP Profiles table in the upper right pane.
NOTE
You cannot delete <Global Configurations>. You can, however, edit global configurations. For
more information, see “Editing an LLDP profile” on page 384
5. Click Delete.
A confirmation dialog displays.
6. Click Yes to confirm you want to delete the LLDP profile.
The LLDP Profile table row is removed.
7. Click OK.
The CEE Confirmation and Status dialog box displays.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.