DCFM Professional Plus User Manual (53-1001774-01, June 2010)

DCFM Professional Plus User Manual 537
53-1001774-01
18
Displaying and deleting decommissioned key IDs
When disk LUNs are decommissioned, the process includes the disabling of the key record in the
key vault and indicating that the key has been decommissioned. These decommissioned keys are
still stored on the switch. You can display them, copy them, and delete them as an additional
security measure.
1. Select Configure > Encryption from the menu bar.
The Encryption Center dialog box displays.
2. Right click on the switch, and select Decommissioned keyids.
The Decommissioned Key IDs dialog box displays.
3. Click Delete All to delete the decommissioned keys from the switch. As a precaution, you may
want to copy the keys to a secure location before deleting them from the switch. To export the
keys, right-click and select Export which will export all the key IDs.
Viewing and editing switch encryption properties
To view switch encryption properties, complete the following steps.
1. Select Configure > Encryption from the menu bar.
The Encryption Center dialog box displays the status of all encryption-related hardware and
functions at a glance. It is the single launching point for all encryption-related configuration.
2. Select the switch or encryption engine from the Encryption Devices table, and select Switch >
Properties or Engine > Properties from the menu bar, or right-click the switch or encryption
engine and select Properties.
The Encryption Properties dialog box, shown in Figure 203, contains the following information: