DCFM Professional Plus User Manual (53-1001774-01, June 2010)

540 DCFM Professional Plus User Manual
53-1001774-01
18
HA Cluster Name - the name of the HA cluster (for example, Cluster1), if in an HA configuration.
The name can have a maximum of 31 characters. Only letters, digits, and underscores are
allowed.
Media Type - the media type of the encryption engine. Possible values are Disk and Tape.
Re-Balance Recommended - A value of Yes or No indicating whether or not LUN re-balancing is
recommended for an encryption engine that is hosting both disk and tape LUNs.
System Card - the current status of system card information for the encryption engine.
(registered or not registered).
Exporting the public key certificate signing request (CSR) from
Properties
To export the CSR under Public Key Certificate Request, complete the following steps.
1. Click Export.
A Save dialog box displays.
2. Browse to the location where you want to save the certificate.
3. Click Save.
Alternatively, you may also copy the CSR and paste it to a file.
4. Submit the CSR to a certificate authority (CA) for signing. CA signing requirements and
procedures differ per key manager appliance. Refer to “Supported encryption key manager
appliances” on page 463 and look through the following sections to find the procedure that
applies.
Importing a signed public key certificate from Properties
To import a signed public key certificate, complete the following steps.
1. Click Import.
The Import Signed Certificate dialog box displays.
2. Enter or browse to the file containing the signed certificate.
3. Click OK.
The file is imported onto the switch.
Enabling the encryption engine state from Properties
To enable the encryption engine, complete the following steps.