DCFM Professional Plus User Manual (53-1001774-01, June 2010)

DCFM Professional Plus User Manual 37
53-1001774-01
2
FIGURE 18 Discover Setup dialog box
2. Click Add Fabric to specify the IP addresses of the devices you want to discover.
The Address Properties dialog box displays.
FIGURE 19 Address Properties dialog box (IP Address tab)
3. Enter a name for the fabric in the Fabric Name field.
4. Enter an IP address for a device in the IP Address field.
For seed switch requirements, refer to “Seed switch requirements” on page 54.
NOTE
The Backbone Chassis cannot be used as a seed switch.
NOTE
Professional and Professional Plus editions cannot manage the Backbone Chassis.
Professional edition cannot manage pure M-EOS fabrics.
NOTE
Professional Plus edition can discover up to 4 fabrics.