Comware CLI Commands in Provision Software 2013/06

display igmp routing-table
Related ProVisionComware
show ip igmp vlan <vid>display igmp routing-table
Displays information regarding the IGMP routing table.
HP Switch# display igmp routing-table
Routing table
Total 5 entries
00001. (*, 239.1.1.1)
List of 1 downstream interface
Vlan-interface30 (75.1.30.1),
Protocol: IGMP
00002. (*, 239.1.1.2)
List of 1 downstream interface
Vlan-interface30 (75.1.30.1),
Protocol: IGMP
00003. (*, 239.1.1.3)
List of 1 downstream interface
Vlan-interface30 (75.1.30.1),
Protocol: IGMP
00004. (*, 239.1.1.4)
List of 1 downstream interface
Vlan-interface30 (75.1.30.1),
Protocol: IGMP
00005. (*, 239.1.1.5)
List of 1 downstream interface
Vlan-interface30 (75.1.30.1),
Protocol: IGMP
Field Descriptions
Routing table of VPN-Instance: public net: Public network IGMP routing table
00001: Sequence number of this (*, G) entry
(*, 225.1.1.1): A (*, G) entry of the IGMP routing table
A (*, G) entry of the IGMP routing table IGMP route flags:
• ACT: Indicates IGMP routing entries that have been used for forwarding data packets but
have the multicast group address out of the SSM group range
• SUC: Indicates IGMP routing entries that have been added to the forwarding table and have
the multicast group address within the SSM group range
List of 1 downstream interface: Downstream interface list, namely, the interfaces to which multicast
data for this group will be forwarded
in include mode: The downstream interface is in the include mode
in exclude mode: The downstream interface is in the exclude mode
Downstream interface is none: No downstream interfaces exist
Protocol: Protocol type
Example of Related ProVision Software Command Output.
There is no direct equivalent ProVision command. Please see "show ip igmp vlan <vid>" on page
2-51.
display igmp routing-table 101