Comware CLI Commands in Provision Software 2013/06

display interface brief
Related ProVisionComware
show interfaces briefdisplay interface brief
NOTE: This command is not supported on the HP 2920 Series switches.
Displays brief information about Layer 3 interfaces (tunnels) and Layer 2 interfaces.
HP Switch(config)# display interface brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
tunnel-1 Down UP 20.1.1.1 tunnel1
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface Link Speed Duplex Type PVID Description
A1 UP auto A n/a 1 port1
A2 DOWN auto A n/a 20 port2
A3 DOWN auto A n/a 1
A4 DOWN auto A n/a 1
A5 DOWN auto A n/a 1
A6 DOWN auto A n/a 1
A7 DOWN auto A n/a 1
A8 DOWN auto A n/a 1
A9 DOWN auto A n/a 1
.
.
.
Field Descriptions
The brief information of interface(s) under route mode: Brief information about Layer 3 interfaces.
The brief information of interface(s) under bridge mode: Brief information about Layer 2 interfaces.
Link: ADM - administratively down; Stby - standby: Link status:
• ADM—The interface has been administratively shut down. To recover its physical layer state,
perform the undo shutdown command.
• Stby—The interface is operating as a backup interface.
Speed or Duplex: (a)/A - auto; H - half; F - full: If the speed of an interface is automatically
negotiated, its speed attribute includes the auto negotiation flag, letter a in parentheses. If the
duplex mode of an interface is automatically negotiated, its duplex mode attribute includes the
auto negotiation flag, letter a in parentheses or a capital A. Letter H indicates the half duplex
mode, and letter F indicates the full duplex mode.
Type: A - access; T - trunk; H - hybrid: Link type options for Ethernet interfaces.
Protocol: (s) - spoofing: If the network layer protocol state of an interface is shown as UP, but its
link is an on-demand link or not present, its protocol attribute includes the spoofing flag (an s in
parentheses).
Interface: The abbreviated interface name.
Link: The physical link state of the interface.
Speed: The interface speed, in bps.
104 Display Commands