Comware CLI Commands in Provision Software 2013/06

display ip community-list
Related ProVisionComware
show ip community-listdisplay ip community-list
NOTE: This command is not supported on the HP 2920 Series switches.
Displays BGP community list information
HP Switch# display ip community-list
Community List Number community-1
permit 10
deny 50
Field Descriptions
Community List Number < community-name >: Specifies the community being reported.
permit: Permitted routes that belong to the community .
deny: Denied routes that belong to the community.
Operating Notes
To enable BGP in ProVision software, see the “BGP (Border Gateway Protocol)” chapter in the
latest Multicast and Routing Guide for your switch.
Minimum Software Version: 15.08.
Example of Related ProVision Software Command Output.
HP Switch# show ip community-list
ip community list community-1 standard
permit 10
deny 50
ip as-path Field Mappings.
ProVision SoftwareComware
ip community listCommunity List Number
permitpermit
denydeny
display ip community-list 111