Comware CLI Commands in Provision Software 2013/06

display ipv6 neighbors all
Related ProVisionComware
show ipv6 neighborsdisplay ipv6 ipv6 neighbors all
Displays neighbor information.
HP Switch(config)# display ipv6 neighbors all
Type: S-Static D-Dynamic
IPv6 Address Link-layer VID Interface State T Age
FE80::200:5EFF:FE32:B800 0000-5e32-b800 N/A GE3/0/1 REACH S -
Field Descriptions
IPv6 Address: IPv6 address of a neighbor.
Link-layer: Link layer address (MAC address of a neighbor).
VID: VLAN to which the interface connected with a neighbor belongs.
Interface: Interface connected with a neighbor.
State: State of neighbor, including:
• NCMP: The address is being resolved. The link layer address of the neighbor is unknown.
• REACH: The neighbor is reachable.
• STALE: The reachability of the neighbor is unknown. The switch will not verify the reachability
any longer unless data is sent to the neighbor.
• DELAY: The reachability of the neighbor is unknown. The switch sends an NS message after
a delay.
• PROBE: The reachability of the neighbor is unknown. The switch sends an NS message to
verify the reachability of the neighbor.
T: Type of neighbor information, including static configuration and dynamic acquisition.
Age: For a static entry, a hyphen “-“ is displayed. For a dynamic entry, the reachable time (in
seconds) elapsed is displayed, and if it is never reachable, “#” is displayed (for a neighbor acquired
dynamically).
VPN-instance Name: Name of a VPN. [No Vrf] indicates no VPN is configured.
Operating Notes
For more information, see the “IPv6 Management Features” chapter in the latest IPv6 Configuration
Guide for your switch.
Minimum Software Version: 15.11.
Example of Related ProVision Software Command Output.
HP Switch(config)# show ipv6 neighbors
IPv6 ND Cache Entries
IPv6 Address MAC Address State Type Port
--------------------------------------- ------------- ----- ------- ----
2001:db8:260:212::101 0013c4-dd14b0 STALE dynamic A1
2001:db8:260:214::1:15 001279-88a100 REACH local
fe80::1:1 001279-88a100 REACH local
124 Display Commands