Comware CLI Commands in Provision Software 2013/06

display lacp system-id
Related ProVisionComware
show lacp localdisplay lacp system-id
Displays the system ID of the local system. The system LACP priority and the system MAC address
comprise the system ID.
HP Switch# display lacp system-id
Actor System ID: 0x2f00, 001871-c42f00
Field Descriptions
Actor System ID: The local system ID, including system LACP priority and system
MAC address. In the above example:
• 0x2f00 =
System LACP Priority
• 001871-c42f00 =
System MAC Address
Operating Notes
To enable LACP operation in ProVision software, use the following command from the context of
a port interface on which you want to enable LACP:
lacp
For more on LACP operation in ProVision software, refer to the “Port Trunking” chapter in the latest
Management and Configuration Guide for your switch.
Minimum Software Version: 15.08.
Example of Related ProVision Software Command Output. The ProVision software includes a list
of ports configured for LACP operation, along with some additional data fields.
HP Switch(eth-A13-A14)# show lacp local
LACP Local Information.
System ID: 001871-c42f00
LACP Tx Rx Timer
Port Trunk Mode Aggregated Timer Expired
---- ------ -------- ----------- ------ --------
A13 A13 Active Yes Fast No
A14 A14 Active Yes Fast No
lacp system-id Field Mappings.
ProVision SoftwareComware
System IDActor System ID
Portn/a
Trunkn/a
LACP Moden/a
Aggregatedn/a
display lacp system-id 131