Comware CLI Commands in Provision Software 2013/06

display link-aggregation member-port
Related ProVisionComware
No equivalent ProVision software commanddisplay link-aggregation member-port display
link-aggregation member-port GigabitEthernet
<port-number>
Displays the detailed link aggregation information of the specified member ports or all member
ports if no port is specified.
For a member port in a static aggregation group, only the port number and operational key are
displayed, because the aggregation group is unaware of information about the peer groups.
HP Switch# display link-aggregation member-port
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
1:
Aggregation Interface: Trk1
Port Number: 1
Oper-Key: 1
2:
Aggregation Interface: Dyn1
Local:
Port Number: 2
Port Priority: 32768
Oper-Key: 2
Flag: n/a
Remote:
System ID: 0x8000, 0000-0000-0000
Port Number: 0
Port Priority: 32768
Oper-Key: 0
Flag: n/a
Received LACP Packets: 0 packet(s)
Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)
Field Descriptions
Flags: One-octet LACP state flags field:
• A indicates whether LACP is enabled. 1 for enabled and 0 for disabled.
• B indicates the timeout control value. 1 for short timeout, and 0 for long timeout.
• C indicates whether the link is considered as aggregatable by the sending system. 1 for true,
and 0 for false.
• D indicates whether the link is considered as synchronized by the sending system. 1 for true,
and 0 for false.
• E indicates whether the sending system considers that collection of incoming frames is enabled
on the link. 1 for true and 0 for false.
• F indicates whether the sending system considers that distribution of outgoing frames is enabled
on the link. 1 for true and 0 for false.
134 Display Commands