Comware CLI Commands in Provision Software 2013/06

display link-aggregation summary
Related ProVisionComware
No equivalent ProVision software commanddisplay link-aggregation summary
Displays the summary information of all aggregation groups.
Information about the remote system for a static link aggregation group may be either shown as
none or not displayed, because the aggregation group is unaware of information about the peer
groups.
HP Switch# display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x43c0, 0017a4-ff43c0
AGG AGG Partner ID Select Unselect Share
Interface Mode Ports Ports Type
-------------------------------------------------------------------------
Dyn1 D 0x0, 0017a4-7eef40 n/a n/a n/a
Field Descriptions
Aggregation Interface Type: Aggregate interface type:
• BAGG for a Layer 2 aggregate interface.
• RAGG for a Layer 3 aggregate interface.
Aggregation Mode: Aggregation group type:
• S for static link aggregation.
• D for dynamic aggregation.
Loadsharing Type: Loadsharing type:
• Shar for load sharing.
• NonS for non-load sharing.
Actor System ID: Local system ID, which comprises the system LACP priority and the system MAC
address.
AGG Interface: Type and number of the aggregate interface.
Partner ID: System ID of the partner, which comprises the system LACP priority and the system
MAC address. AGG Mode: Aggregation group type.
Select Ports: The number of Selected ports.
Unselect Ports: The number of Unselected ports.
Share Type: Load sharing type.
136 Display Commands