Comware CLI Commands in Provision Software 2013/06

display link-aggregation verbose
Related ProVisionComware
No equivalent ProVision software commanddisplay link-aggregation verbose display link-aggregation
verbose Bridge-aggregation display link-aggregation
verbose Bridge-aggregation <aggregation-id>
Displays detailed information about the aggregation groups corresponding to the aggregate
interfaces in the system.
To display the information of a specific Layer 2 aggregation group, use the display link-aggregation
verbose bridge-aggregation bridge-aggregation-number command.
To display the information of all Layer 2 aggregate interfaces, use the display link-aggregation
verbose bridge-aggregation command.
HP Switch# display link-aggregation verbose bridge-aggregation
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation Interface: Trk1
Aggregation Mode: Static
Loadsharing Type: Shar
Port Status Oper-Key
---------------------------------------------------------------------------
A1 n/a 1
Aggregation Interface: Dyn1
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: none
Local:
Port Status Priority Oper-Key Flag
----------------------------------------------------------------------------
A2 n/a 32768 2 n/a
Remote:
Actor Partner Priority Oper-Key SystemID Flag
----------------------------------------------------------------------------
A2 0 32768 0 n/a n/a
Field Descriptions
Loadsharing Type: Loadsharing type:
• Shar for load sharing.
• NonS for non-load sharing.
Port Status: Port state: Selected or unselected.
Flags: One-octet LACP state flags field:
• A indicates whether LACP is enabled. 1 for enabled and 0 for disabled.
• B indicates the timeout control value. 1 for short timeout, and 0 for long timeout.
• C indicates whether the link is considered as aggregatable by the sending system. 1 for true,
and 0 for false.
• D indicates whether the link is considered as synchronized by the sending system. 1 for true,
and 0 for false.
display link-aggregation verbose 137