Comware CLI Commands in Provision Software 2013/06

1 Introduction To the ProVision CLI
Comware Command Support in ProVision Software
The selected Comware CLI commands described in this guide are included in the ProVision software
CLI to help Comware-experienced network management staff learn to use the ProVision software
CLI with a minimum of effort.
This edition of Comware CLI Commands in ProVision Software describes the operation and output
of selected Comware display commands added to the ProVision software. Included are related
ProVision software commands and references to further information on configuring the features
reflected in the display command output.
Refer to the latest release notes for your switch product to determine whether Comware commands
are supported.
HP Networking Switches Running ProVision Software with Comware
CLI Commands Included*
HP Networking Switches Running Comware
Software
262026152910al3800350058205120 El3100
291529203500 yl58305120 Sl3300
5400 zl590055003600
6200 yl75005500 E3610
660095005500 Hl4200G
8200 zl105005500 SL4210
125005500G4210G
58004500G
58104510G
4800G
*As of October, 2012. Supported commands depend on software version running on the switch.
Commands Added to the Software Over Several Releases. The Comware command set available
on your switch is determined by the code version it is running. Each command description in this
guide includes the minimum software version supporting that command. For example, a minimum
version of 15.10 means that a switch running K-code must be using Release K.15.10 or greater
and a switch running RA-code must be using RA.15.10 or greater.
Listing Display Commands in the CLI
Use this command: display ?
For example:
HP Switch> display ?
boot-loader Display boot loader information
clock Clock status and configuration information.
command-alias Display command alias
debugging Current setting of debugging switches.
dns DNS status and configuration information
gvrp GARP VLAN Registration Protocol
history-command The historical command information.
igmp IGMP status and configuration information
ip Specify IP(Internet Protocol) configuration information.
lacp Display LACP protocol information
link-aggregation Display Link-aggregation information
memory Display memory information.
14 Introduction To the ProVision CLI